US Cellular Blackberry's

From HowardForums Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 20:05, 6 November 2009
98.144.35.198 (Talk)

← Previous diff		 Revision as of 20:54, 6 November 2009
98.144.35.198 (Talk)

Next diff →
Line 1: Line 1:
 +You will need QPST 2.15
 +Set it to use: Sur6300-BB
 +Read from phone
 +Open M.IP tab
 +Edit profile 0
 +NAI and Tethered NAI should be mobilenumber@vzw3g.com (replace mobilenumber with actual telephone number including area code)
 +MN-HA SPI should be 12C
 +MN-AAA SPI should be 2
 +DMU Public Key ID should be 10
 +Rev Tunnel Preferred checked
 +Home, Primary and Secondary HA address are all 0.0.0.0
 +click ok
 +
 +click PPP Config tab
 +click Um button
 +Tethered NAI and User ID should be mobilenumber@vzw3g.com
 +Password should be vzw
 +check 1xEVDO->1x
 +click AN button
 +User ID should be mobilenumber@vzw3g.com
 +
 +Click Write to phone
 +
 +after phone reboots enter ##SPCCODE Talk
 +On programming screen SIP User ID is mobilenumber@vzw3g.com
 +SIP Password is vzw
 +
 +If there is another field for a user ID, enter mobilenumber@vzw3g.com
 +
 +Save
 +
 +
 +
'''Note: The Anworm books seem to work on most models. The rest of this tutorial (the pc-tech101 part) is experimental and has only been proven to work (mostly) on a US Cellular Blackberry Pearl 8130. It also seems like MMS receive may not work either. This page will be revised/clarified once we figure out (hopefully) what works and doesn't on a per carrier and per model basis. ''' '''Note: The Anworm books seem to work on most models. The rest of this tutorial (the pc-tech101 part) is experimental and has only been proven to work (mostly) on a US Cellular Blackberry Pearl 8130. It also seems like MMS receive may not work either. This page will be revised/clarified once we figure out (hopefully) what works and doesn't on a per carrier and per model basis. '''
Line 25: Line 58:
(you must be in service books under advanced settings):<BR> (you must be in service books under advanced settings):<BR>
<BR> <BR>
- ALT+ ALT S ALT B ALT E ALT B<BR>
- S+
- ALT+
- B+
- ALT+
- E+
- ALT+
- B+
- <BR>+
OR<BR> OR<BR>
- <BR>+ ALT S S ALT B ALT E ALT B<BR>
- ALT+
- S+
- S+
- ALT+
- B+
- ALT+
- E+
- ALT+
- B+
- <BR>+
To load Service Books On the Storm press and hold num button until it locks<BR> To load Service Books On the Storm press and hold num button until it locks<BR>
You will see the lock<BR> You will see the lock<BR>
Then press 4?2?<BR> Then press 4?2?<BR>
- It will show enabled.<BR>+ It should show Legacy Enabled.<BR>
<BR> <BR>
<BR> <BR>

Revision as of 20:54, 6 November 2009

You will need QPST 2.15 Set it to use: Sur6300-BB Read from phone Open M.IP tab Edit profile 0 NAI and Tethered NAI should be mobilenumber@vzw3g.com (replace mobilenumber with actual telephone number including area code) MN-HA SPI should be 12C MN-AAA SPI should be 2 DMU Public Key ID should be 10 Rev Tunnel Preferred checked Home, Primary and Secondary HA address are all 0.0.0.0 click ok

click PPP Config tab click Um button Tethered NAI and User ID should be mobilenumber@vzw3g.com Password should be vzw check 1xEVDO->1x click AN button User ID should be mobilenumber@vzw3g.com

Click Write to phone

after phone reboots enter ##SPCCODE Talk On programming screen SIP User ID is mobilenumber@vzw3g.com SIP Password is vzw

If there is another field for a user ID, enter mobilenumber@vzw3g.com

Save


Note: The Anworm books seem to work on most models. The rest of this tutorial (the pc-tech101 part) is experimental and has only been proven to work (mostly) on a US Cellular Blackberry Pearl 8130. It also seems like MMS receive may not work either. This page will be revised/clarified once we figure out (hopefully) what works and doesn't on a per carrier and per model basis. 

  Blackberrys appear to not support MMS 100%.  
  Some models will send but do not receive.

Procedure:

  • Learn about loading service books using the Anworm guide:
  • pc-tech101 has merged some Verizon books with the Anworm books to enable other features including MMS. 
  ** Provisioning
  ** Blackberry Maps
  ** MMS Transport
  ** MMS Client

Note: The mods above were successfully implemented on YMMV. 

  Note: To enable Legacy mode, use the following methods 
  (you must be in service books under advanced settings):

  

  ALT S ALT B ALT E ALT B

  OR

  ALT S S ALT B ALT E ALT B

  To load Service Books On the Storm press and hold num button until it locks

  You will see the lock

  Then press 4?2?

  It should show Legacy Enabled.








Ref: http://www.howardforums.com/showthread.php?t=1572974


Other tools for BB:

Data usage monitor: http://www.ehnert.net/MiniMoni/

Email without BIS: http://my.funambol.com

Alternative build for funambol (drops email into BB inbox): http://funambol-bb.sourceforge.net/

Retrieved from "http://wiki.howardforums.com/index.php/US_Cellular_Blackberry%27s"